Old mechanic's trick*

Say you have to drive a screw in a location where you only have room to get the screw and screwdriver in there.  Or that you are working at full arm's length, with only one hand.

How would you do it?

Here's an old mechanic's trick:

Start with a piece of tape perhaps an inch long,
held sticky side up

Push the screw thru the tape,
so that the sticky side is against the
underside of the screw head

Insert the screwdriver into it's recess on the screw
head, and fold the two flaps of tape up over the
head onto the blade of the screwdriver

Voila!  Now you can start the screw with just one hand because it is held to the screwdriver.  Just before tightening the screw fully, withdraw the screwdriver - the tape will come with it.  Then finish tightening the screw.


* I meant that to be parsed as an old trick that mechanics know, but I suppose it could also be a trick that old mechanics know...